The Hawkins Pro 30 is designed to charge 2 x 12V batteries in series. This charger is ideally suited for the small motor workshop, service station or small fleet operation. The output is fuse protected against reverse polarity. The charger is protected against component failure by means of a fuse on the mains input. It has an overload re-settable breaker if the charge current exceeds the rated output of the charger. It is a manual taper charger and as such must be disconnected when the charge current falls close to zero. This charger is not automatic and is therefore not recommended for unsupervised charging of sealed batteries.
Hawkins Pro 30 is locally manufactured.
Specification
Conforms to SABS IEC 335-2-29
Input Voltage: 230Vac
Battery Voltage: 6/12/24Vdc
Charge Current: 20Adc
Dimensions 210/210/315 mm
Weight: 10.1Kg
