Specification
The Hawkins Pro 15 is designed to charge up to a maximum of four 6 Volt or two 12 Volt batteries in series. This charger is ideally suited for the small motor workshop, service station or small fleet or farming operation. The output is fuse protected against reverse polarity. The charger is protected against component failure by means of a fuse on the mains input. It has an overload re-settable circuit breaker if the charge current exceeds the rated output of the charger. It is a manual taper charger and as such must be disconnected or turned off when the charge current reduces to close to zero amps. This charger is not an automatic and is therefore not recommended for unsupervised charging of sealed batteries.
Hawkins Pro 15 is designed and manufactured in the republic of South Africa. A printable data sheet is available in PDF format.
Specification
Conforms to SABS IEC 335-2-29
Input Voltage : 230Vac
Battery Voltage : 6Vdc / 12Vdc / 24Vdc
Charge Current : 10Adc
Dimensions : 210/210/315mm
Weight: 6,3Kg
